Water refilling in the small mini-reef - This is the new Smart ATO Nano SATO-270D

08.12.2021

We remember. There is hardly a second company on the market that offers as much in the way of aquarium safety as Auto AQUA. Now comes a new refill system for pico and nano systems up to approx. 200 litres. Discover innovation and user-friendliness.

For small nano and pico aquariums of less than 200 litres, a stable osmotic equilibrium is important, as they are particularly sensitive to the constant to the constant fluctuations in salt concentrations. For this Smart ATO Nano from AutoAqua has been specially developed for this reason.

Smart ATO Nano is easy to install and operates silently. A powerful pump and a double optical sensor are combined in a single housing. in a single housing. So there are no cables in your aquarium. aquarium, giving it a neat and safe appearance! Smart ATO Nano comes with two important and smart accessories: a pre-filter and an anti-siphon valve. The first filter removes particles from the tank, and the second filter protects the pump and stops the the flow of water caused by a possible siphon.

Compact and all in one

Through the integration of a dual sensor and a diaphragm pump, Smart ATO Nano is extremely easy to install on the aquarium: Hang it on the side wall of the tank, connect the hoses and connect the power supply. connect the power supply. In addition, the cable length of the sensor is adjustable, so you can hide the excess in the housing!

Intelligent security technology QST

The unique Quick Security Technology (QST) detects a sensor or pump failure and sensor or pump and immediately prevents an overflow, without the need complicated settings have to be made. Thanks to the intuitive LED display, the status can be seen at a glance.

Screwless quick disassembly.

The screwless design allows for assembly and disassembly within a of a minute. Since there are no screws, there is also no

Since there are no screws, there is no risk of the aquarium being affected by rust!

Easy installation and versatile mounting positions.

The "Hang-On Back" design is practical and flexible for aquariums/basins with or without a rim. The easy-to-install magnetic dual sensor can be positioned at any desired location. The adjustable mount is suitable for aquarium glass thicknesses from 3 to 10 mm.

Technical data :

Power supply:
- Input: 100-240 VAC 50-60 Hz.
- Output: 12 VDC / 1A.
- Length of power cable: 180 cm.

Diaphragm pump :
- Suction height: 200 cm.
- Flow rate: 30 L/h.

Max. Thickness of mounting :
- Sensor: 12.7 mm
- Mounting: 3-10 mm

Anti-siphon valve:
- Anti-siphon pressure: 60 cm

Sensor cable length: 45 cm

Hose:
- Length: 200 cm
- Inner diameter: 4 mm / Outer diameter: 6.4 mm

[image:17944]

[image:17941]

Installation:

1. Remove the cover of the Smart ATO nano controller and attach it to the tank/sump with the holder.

2. Attach the sensor with the magnet to the normal water level (with the water level at the bottom point).* If the cable is too long, push it back into the main housing. [picRight:17942]

3. Cut the hose to the correct length. Connect the water inlet hose to the pre-filter and place it in the water.

4. Connect the water outlet hose and insert it into the holder.

5. Connect the white part of the anti-siphon valve to the end of the hose and hold it out of the water.

6. Put the lid back on the Smart ATO nano controller and attach the tube with the opening on the side of the lid. [imageright:17943]

7. Connect the power supply and perform a one-time filling to check that no water drips after the pump stops (forward siphon).

8. Unplug and re-plug the power adapter to reset the unit.

*Please do not install the sensor near the water outlet to avoid bubble interference.

How do you like this article? 1 0